Cooler Master MasterBox Q300L Micro-ATX Tower with Magnetic Design Dust Filter, Transparent Acrylic Side Panel, Adjustable I/O & Fully Ventilated Airflow, Black (MCB-Q300L-KANN-S00)

This is a really amazing case, no wasted space at all and completely covered in magnetic dust grills to make cleaning easy. Pretty much perfect for a small case and very easy to work with unlike most smaller cases. As a bonus, the magnetism also made installing the fans very easy and you can get more of them in there than I would have imagined.

This is an absolutely amazing micro-ATX case. It is easy to work in. It looks great. The filters on the bottom, front, and top are easy to wipe off and do a good job keeping things out. The cable management is better than expected for such a small case.The only caveat to all of this, is that this case is not sufficient for modern high end video cards. It will not support a 3 wide and 3 fan GPU. While one could technically fit once inside there is not available space in the opening for it to be inserted.

I picked up the Cooler Master Q300L V2 to use with my Plex server. I was looking for an inexpensive case that would not take up too much space but looked good. This fit the bill.Pros:- Ample space for cable management behind the motherboard tray- Compact design- Space for a 240MM AIO (front mount)- Tempered glass side panel- Plenty of cable pass-throughs- Supports 120 and 240 MM fans- Front panel USB C- Can be used both vertical and horizontalNeutral:- Pre-drilled fan holes smaller than most case fan screws (120 mm fans)- Some restrictions on component sizeCons:No basement"pop-out" PCI slot coversMetal feels flimsy (it held up fine for the build, but I could easily see it getting bent if I wasn't careful)Included case fan is very basicThe Cooler Master Q300L V2 is a good choice if you are looking for a compact case at a budget price. The case is similar to the $20-dollar cheaper original Q300L (and uses the same chassis) but adds a USB-C connection to the front panel and replaces the acrylic side panel with tempered glass. They also updated the magnetic filters to a new design. There is plenty of room behind the motherboard tray for cable management and disk drives - there are mounts for one 3.5" and two 2.5" drives.Additional case fans are a must as the air holes in the case walls are much smaller than the printed side of the magnetic filter would have you believe. I bought a 5-pack of Antec P12 120MM fans to go along with this case and mounted two front intake, one rear exhaust, and two top exhaust. That, along with my CPU cooler (Cooler Master 212 Hyper Black Edition) does the trick. Idle temps are around 35-36 Celsius for a Core Ultra 7 265k using stock settings with a 24 Celsius (75 Fahrenheit) ambient room temp. Under load (Cinebench R23 multi-core test) some cores peaked at about 82 Celcius but in general the package was in the high 60s to mid 70s. While the pre-drilled fan holes were too small for the fan screws, the case air holes were perfectly sized and actually provided more flexibility for fan mounting.There are some restrictions on component size, but they are well documented. I did not have any issues fitting any of my parts. I did see in an online review (and verified with my build) that even though you can fit a bottom fan in the case, depending on the size of your PSU the cables may be in the way.Building in this case was OK. The lack of a removable top and the limited space once components were added made running some wires more difficult. I will note that if I had to do it again I would have added components in a different order. For example, with the PSU installed it was harder to connect the back-of-system plugs (HD audio, fans) to the MicroATX board I used as it was very close to the connecters and limited the approach.All in all, I would recommend this case if you are in the market for a good looking, inexpensive, compact case for a budget or even mid-range build.

The swap was easy and all nesisary hardware came with it, the case is of excellent quality and I'm very happy with it. Fit the 5 120mm fans and an 240mm aio CPU cooler. Cable management was easy. Overall looks great!

Very simple case to work with. The cable manangement is perfect too. Not a big fan of the filter pattern design. If you want more than one 3.5" drive, you will have to get creative.

So first I'd like to state that this review is specifically for the Q300L model. Amazon does this annoying thing where they mix all the reviews of all the models together and I can't stand it so I'm just stating the model flat out.I just built my 10 year old nephew’s PC using this case and I have to say that I was very surprised at how much I loved building in this case. Originally I bought the Compucase HEC HX300 case for 30$ from Newegg and I was just frustrated at the lack of air flow from that case. It only had room for one fan which was the back exhaust and that's it. It didn't even have holes for the power supply's intake fan! It was my fault for not researching enough and buying something so cheap. Then I did a little research and came across this case. It is only 50$ but has everything I want. I've seen PC builders on youtube build with this case and they all had great things to say.So the first thing I like about this case is obviously how much airflow it allows. It's an interesting design because there are holes all over the top, all over the bottom, and all over the front and you can install 4 fans if you wanted to (2 up top, 2 in front, 2 in bottom) in addition to the included exhaust fan at the back making it support up to 5 fans! Now with all those holes you might be thinking this is going to be an ugly case but as you'll see in the pictures this is not the case (pun intended) and it has very sleek looking dust filters to cover the top, front, and it’s not obvious from the picture but it has a filter on the bottom as well. I was pleasantly surprised to see that the filter is magnetic which made removing them to install my fans a breeze (pun intended). I also imagine cleaning them when they get dirty will also be very simple. You can simple remove them and just rinse with water. One tip when installing fans is that since there’s air holes all over, they actually made a very small indentation around the holes that you should screw in your fans. These “guides” are hard to notice but if you look closely you’ll see them. They have space for 140mm and 120mm fans depending on whatever you want. Air is able to easily flow through the filter so my air flow issues were resolved!The case also looks very nice in my opinion. I have the black model just because that’s what my nephew wanted but in review videos I’ve seen, the white one looks very nice as well. Cable management at the back is pretty good too and the case comes with a lot of zip ties. The filters I mention above are also very aesthetically pleasing. The power button, 2 USB ports, headphone jack, and speaker jack are on the side which I don’t mind. The interesting thing is that this IO panel can be unscrewed and moved to the other side which is nice. The clear side panel is acrylic but it’s a 50$ case so it’s fine. It doesn’t look bad at all. There’s also room in the cable management area for a 3.5” hard drive and 2 SSD’s inside the main area which is very good.Overall the case was pretty simple to build in. It’s designed very well to maximize airflow while looking great. I think this is an excellent case especially for the price. If you’re in the market for a cheap but good PC case, then you my friends have stumbled on a cheap but GREAT PC case. I would highly recommend this case and am willing to do even more expensive builds with this case in the future.One final note I’ll add, I built my nephew’s pc with a Ryzen 5 1600 processor and RX 480 gpu reference model targeting 1080p gaming and the heat in my old case with that one exhaust fan was reaching around 87 degrees C. After I added two intake fans in the front and one exhaust fan in the top along with the back exhaust fan that comes with this case my temperatures went down into the mid 70’s while gaming which is great. If you want looks as well as functionality for a great price, go with this case.