3D Printer Enclosure with LED Lighting, Fireproof Dustproof Tent Constant Temperature Protective Cover for Creality Ender 3 V3 SE/KE/Ender 3/Ender 3 Pro/Ender 3V2/Ender 3S1/Neo/Anycubic Elegoo, Medium
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7

3D Printer Enclosure with LED Lighting, Fireproof Dustproof Tent Constant Temperature Protective Cover for Creality Ender 3 V3 SE/KE/Ender 3/Ender 3 Pro/Ender 3V2/Ender 3S1/Neo/Anycubic Elegoo, Medium

4.6/5
Product ID: 553952030
Secure Transaction

Details

  • Brand
    YOOPAI
  • Material
    Fibreglass
  • Color
    Black
  • Product Dimensions
    25.6"D x x
  • Item Weight
    4.3 Pounds
💡LED Light Strip
🔥Fireproof Material
🌡️Constant Temperature

Description

✨ Elevate Your Printing Game with Style!

  • SAFETY FIRST - Dustproof and fireproof design protects your printer and loved ones.
  • ILLUMINATE YOUR WORKSPACE - Built-in LED light strip enhances visibility for precise monitoring.
  • STABLE PRINTING ENVIRONMENT - Maintains constant temperature for superior print quality and efficiency.
  • QUICK SETUP LONG LASTING USE - Easy 5-minute installation with robust construction for durability.
  • NOISE REDUCTION FOR FOCUSED CREATION - Enclosed design minimizes noise, allowing for a peaceful printing experience.

The 3D Printer Enclosure is a versatile protective cover designed for various 3D printers, including popular models from Creality and Anycubic. It features built-in LED lighting for enhanced visibility, a constant temperature environment for improved print quality, and a dustproof, fireproof design for safety. With easy installation and noise reduction capabilities, this enclosure is perfect for both hobbyists and professionals looking to optimize their 3D printing experience.

Large manufacture image 1Large manufacture image 2Large manufacture image 3Large manufacture image 4Large manufacture image 5Large manufacture image 6Large manufacture image 7

Specifications

ColorBlack
Enclosure MaterialFibreglass
Operating SystemLinux
Compatible DevicesLaptop
Item Dimensions D x W x H25.6"D x 21.6"W x 28.7"H

Have a Question? See What Others Asked

I modified my ender 3 v2 spool holder to a height of approximately 12 inches. Is the height suitable for a medium size?
Is it difficult to install?
Does it keep the smell/fumes in?
Is it difficult to install and how stable?

Reviews

4.6

All from verified purchases

G**Y

Protects from inside airflow, and reduces the noise some

It assembled easily and the interior light is a must-have to see the black media, and if you're monitoring prints with a camera. It is much bigger than I imagined - despite the company providing dimensions. I was surprised to see it has a floor panel also (same material as sides). Has multiple sealed cord openings. Expecting the top of my spool to rub the top, I lowered it about 8" on my AnkerMake M5c by designing a spool relocation adapter that I posted for free download at Printables, along with a Camera shelf and wire management clips. This does not appreciably reduce printer or fan noise, but instead it creates a much more consistent environment and shelters the printer from air flow when the air conditioner is running, resulting in more successful printing.

S**K

Should have bought it sooner

I kept putting off getting this because it meant I would have to relocate my printer and rearrange the storage room to accommodate it. Definitely wish I’d pulled the trigger sooner. No more warped prints and print quality appears to be slightly better. Definitely recommend it even if you’re only printing PLA or PETG.

M**.

A GREAT value for a surprisingly effective enclosure!

I needed to reliably print a few parts for a Voron 2.4 build, which requires ABS. I have an old Prusa I3 clone in the garage which I've occasionally used for this since there are usually no drafts, and I stink up the garage instead of the house. During the hot summer months, when the garage is often pushing 90F, I'm normally able to get away with printing ABS well with an open frame. Come fall and winter, warping becomes an issue. Plus, the family was getting tired of the "Don't open the garage door!" exclamations from me when I was printing ABS.Picked this up to provide a quick enclosure, with hopes it would allow reliable ABS printing (and allow the garage door to be opened while doing so). This has worked SHOCKINGLY well. Since my printer has been in this enclosure, I've been able to print about 10 parts, a few of which are highly prone to warping (small contact space on the bed). All of them have printed successfully and beautifully. Of course, the blast of "ABS stink" when you unzip it to remove the print is fun."Just the facts, ma'am":Pros:- Super easy to assemble, although it's bigger than you think so have some space.- Canvas with the shiny fireproof lining is thick and well sewed. It didn't feel "cheap" at all. There is quality here.- I find the LED to be plenty of illumination, especially since it reflects off the shiny material inside. My print camera finds it to be plenty of light, too.- A good number of round bungs to route cables through, that seem to be in the right place. Two on the back and one on the right-hand side towards the rear.- Has a rather large flap on the left, which I'm not using. Closes with velcro.- I like that measurements were listed clearly, so I could ensure it would fit and get the correct size. Medium worked for my Prusa I3 clone (about the size of an Ender 3, I guess) with room to spare.- I can print ABS consistently, and get strong, clean prints!Cons:- Bungs are a little on the tight side. Had to really push the power cable through and thought I was going to tear the fabric. I did not, which is also a pro I guess, that canvas is pretty tough!- The clear viewing window has a lot of folds in it, so it can be a little difficult to see print details.Overall, I think this is a fantastic value if you're looking for an inexpensive and plug-and-play enclosure for your 3D printer.

C**Y

Perfect for my Anycubic Kobra 2

UPDATE: During my first print using this enclosure my chilly basement was 65 deg F. Inside the enclosure the temp was 83 deg F two hours into a print with PETG.I am very happy with this enclosure so far. I printed a top spool mount for my filament ahead of time and it fits perfectly. There are gusseted holes in the back on the bottom on both sides for routing power cables. The zippers seem decent and smooth. All I’ve done so far is do an auto leveling once I placed my printer inside but I could feel that the air inside was a bit warmer than the ambient air even with the door flap open.Running a Anycubic Kobra 2 (standard). This enclosure would not have enough space to also enclose the side mounted filament spool holder but as you can see relocating it to the top is a simple solution.Best of all it keeps my curious cat away from the printer!It did help having a second set of hands to get the frame into the cover but overall the assembly wasn’t too bad.

N**Y

Pain in the butt to put together, but works well.

Total pain in the @#!## to put together, but it works great as an enclosure. This is a must have for those ASA and PC printing peeps.

A**S

Cheap and Works

Used with a MakerBot Replicator Plus. Big enough to fit most printers, keeps the heat, smell, and noise down. Mostly print with PLA so not too worried about toxic fumes but didn't notice and fumes leaking out. Muffles the noise but still audible. Slot in back used for easy way to route filament and power cords.

Z**1

Just fits the Ender 3 v3 plus, but you have to place it just right for the bed to move.

I have an ender 3 v3 plus and it just fits. Had to print out a new arm to change the direction of the spool holder to make it fit. Dont put the machine all the way back or forward, push the bed back and forth to ensure it's at the correct distance...it seems ok if the bed pushes forward just a bit..but once it starts printing it's ok. The LED is bright. I should have bought the bigger one, but this fits well enough.

M**E

Great enclosure for my Prusa printer!

Great enclosure. Well made and easy to assemble. I had it put together and my printer setup inside of it in ~15 min. My ancient Prusa I3 Mk2 printer fits perfectly inside the medium enclosure.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

Zainab N.

Fantastic and great service. Shipping was faster than expected.

1 week ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
£56.10

Duties & taxes incl.

UKstore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

3d Printer Enclosure With Led Lighting Fireproof Dustproof Tent Constant | Desertcart GB