Fourth Level MFG Atlas Graphics Card Brace, Anti Sag, Deepcool GPU Support, Video Card Holder, for Custom Desktop PC Gaming, Acrylic GPU Stand Case Mod, Bitcoin, Mining

Works okay. Supports my Sparkle B580 with no problems. Arrived on time and as described. I especially like that it doesn't block airflow from bottom fans.

I ordered two of these braces for my two computers running GTX 1070s and I am 100% satisfied with the purchase. They arrived exactly as described and have taken all of the sag out of each graphics card, one of which had a very noticeable sag! An added bonus is that they look awesome - both of my computers have side windows so the look was a concern.Some of the reviewers have been negative regarding the strength of these braces allegedly causing them to crack or fracture during installation. After installing these braces into two computers, I can attest to the fact that they are neither brittle nor weak. My only guess is that those reviewers must have either mishandled the product or used a high torque drill to install them. A simple phillips head screwdriver and four minutes of your time is all it takes. I do recommend installing with the computer resting on it's side in order to facilitate the proper placement of the rubber stays to clear the GPU fans.My last thought is regarding the price. A lot of reviewers have complained that you are only getting a piece of plastic with some screws and washers for almost $20. In my opinion, the functionality of this item makes it worth every penny. They do exactly what you need to protect your GPU card, which cost hundreds of dollars in my case, and they do it while looking great in the process. To my way of thinking - that's priceless!

This worked pretty well for my MSI 1070 Gaming X and the NZXT H440 case. The card is level now and the fans seems to be spinning fine. Couple of points:- The bump dots' adhesive doesn't stay on the bump dots very well when taking them off the sheet, so you have to be pretty careful or the adhesive will be ruined. That being said, there were five or six bump dots included.- It is made out of plastic. Not a big deal as it is pretty thick and sturdy and now looking through other reviews, I see that mentioned. I would have liked it mentioned in the product description. A bit of a high price for plastic.- It would have been better if, as others have mentioned, it came with some offsets. While the bump dots to make it so it doesn't come in contact with the fans, having out further on the edge of the card would keep it entirely away from the fans and supported better. Just another thing that I need to buy and for the overall price of the product should have been included.Overall, it worked well and I would recommend it. If you do have the H440 and two cards, this will not work for any card unless it is in the top slot. There isn't enough room for with the second slot or at least it would be a very close fit, if at all.

So I got this before noticing there were metal ones for cheaper. I still had time to cancel my order, but I don't like the look of any of the metal ones I could find. So, I figured I'd give it a shot. I think an important detail here is noting that my GPU was already sagging pretty harshly and is a big/heavy card (ASUS 1070 STRIX) that already had a metal backplate. After the brace was installed it is no longer sagging as badly, however, it is still sagging a little (but I think the card is just permanently bent now). It's no longer noticeable. What is noticeable though is that the brace is now bending trying to keep the card up. But, again, I think this is more due to me installing this brace too late. My GPU was already bent and now the brace is having to attempt to force it back. Perhaps in time, it will straighten the card out enough that a new brace won't bend.In my excitement, I forgot to take a proper before picture. So the before in my before/after picture is a crop from another picture in which the GPU was in the background. So please pardon the blurriness. Take note of the gap between the GPU and the sound card above the GPU to see how extreme the sagging was and now isn't.I docked 2 stars because the brace bent. I didn't do 1 star because it is currently performing the function it was intended to (which is to keep the GPU from sagging).P.S. Someone in another review said this brace is 3D printed. It is not 3D printed. It looks to be laser cut plastic, it even still had the protective paper on it when it arrived.Update 2018-06-08The GPU is now noticeably sagging. So I guess I'll be going with a metal one. Dropped rating to 1 star.

Works as it should. One side is matte black, the other is glossy. Installed it without issues. Just a bit tricky to the rubber feet attached to just the right spot. Stacked 2 of them to clear the fans. Fits my card. Could have been a bit longer tho.*Update* Broke after 7 months. Took my pc apart to redo my watercooling and while adjusting the bracket to fit my video card batter, it just snapped in 2 pieces. I should've went with the metal one instead :-(