DKTIE Static Cling Decorative Window Film with Installation Tools Non Adhesive Privacy Film, Stained Glass Window Film for Bathroom Shower Door Heat Cotrol Anti UV, 17.7 x 78.7 Inch

This stuff is awesome! It was super easy to apply to my closet window. After you get the clear plastic off of the back, (using a pin or safety pin to get a hold of the clear plastic) you will notice one side is smooth and the other side has a texture. Put the smooth side against the window after you saturate the glass with plenty of soapy water.. Its a bit hard to match up the patterns because it is a busy pattern. But the part I did match up looks great. Yes if you waste a lot of film then you can definitely match the pattern up. I just choose not to waste a lot of film. The blade that comes with the film cuts like butter. What I did was to apply a thin line of clear sealant along the edges of the window and film and where my seams met. This way, there is no way for the film to ever come up over time. Enough light comes through but there is absolutely no way for someone to see in or me to see out. Even if I'm in my closet at night with the light on. Its perfect! I plan to put what's left and the other roll on my bedroom window. The sun comes in bright in the morning. And so does the heat in the Summer time. Knock out two issues with this material.

I am extremely happy with this product. I got it to cover a whole wall of mirrored closet doors in a new place that I just rented, so that movement in my reflection isn't constantly catching my eye whenever I'm in my bedroom. Since I put it onto mirrored doors instead of windows I can't review the sheerness, but on a mirror reflection & movement in the reflection is completely gone, which is what I wanted. Unfortunately for me the widest roll leaves a few inches of mirror reflection on either side of each door, so I'll have to buy some glass pens and fill in with those. We'll see how that goes.Regarding installation I can see that my many years of scrapbooking made the installation much easier for me than it would have been for my husband or some other members of my family, so I'll mention a few tips here, for the non-crafters who may need to install this stuff.Tools - A few extra tools I found critical to ease of installation were;1- A pair of scissors2- A straight edge for cutting off the excess film. I used a yardstick. A ruler would also work.3- CLEAR scotch tape (gift wrap tape.) NOT the kind that you can't see through, which has removable qualities for wrapping gifts. You need sticky tape of some kind, not removable tape.4- All the tools that came with the film are in the middle of the tube. There are two pieces for the squeegie, a spray bottle, and a blade knife.Techniques -1- Gather your tools and put them right next to the glass where you want to install the decorative-film.2- Clean the glass or mirror surface that you want to put it on with soapy water and a scratchy scrubber to remove EVERYTHING that may be stuck to the glass. Every tiny little thing.3- It can be difficult to initially separate the protective backing-film layer from the decorative-film layer. Use the tape to do this. Stick the tape to the back corner (on the backing-film side) rubbing hard to make the tape really stick to the backing-film, and then pull on the tape like a tab-pull. You may need to get it started by also using your fingernail to pick at & lift the edge of the decorative film, which is a tad bit thicker than the backing-film.3- Once you've lifted the backing-film from the decorative film, cut a 2-4 inch strip of the backing-film off at the edge all the way across. Cut off the backing film on the edge that you want to install at the top of your window or mirror. If you peel off the entire backing it will be very difficult to get it aligned correctly when you go to stick it to the window, because it will grab & stick to the glass all over the place instead of just at the top.4- Spray the exposed decorative film strip and the top 10-12 inches of the glass that you want to stick it to. Not light spray, you want it moderately wet. You don't need water to pour down the glass, but you do want more than just a light mist.5- Let the film unroll from the top edge and hang down while you stick the 2-4 inches of exposed wet decorative-film edge to the glass. I did it with my hand, but if it's having trouble sticking you may need to use the squeegie that came with the film. When you are done sticking the top strip to the glass the rest should hang. Step back and make sure you aligned the top the way you want it, so that when you're done it's not installed slightly tilted.6- Once you see that the top is aligned correctly, you can peel off the back layer all the way down. Once you've peeled off the backing you should work from the top down, and from the middle outward. Do about 10 inches at a time and make sure you've removed all the bubbles before you move down to the next section, and just work your way down to the bottom.7- Once the decorative-film is installed all the way down to the bottom, get a straight edge and use that to evenly cut the bottom off with the blade knife that came with the kit.Done! Hope this helps someone. :)

So I ordered orange?I absolutely love it! We had morning sun coming in this window which in Las Vegas that's really intense. I love sun and a bright house but I got up one morning at 6:30am and saw the sun from the window right in my fish tank! Oh no poor fish! So I immediately looked for a solution.Yes I ordered orange. Hmmm 🤔 it's pink 🧐. For me that's even better! I instructed my brother to put it up while I was at work but instead he had his girlfriend so it. 😕 Holy moly she should do this professionally! I got a size that was too small but she pieced it together seamlessly! 👏🏼 It looks amazing! The window itself is still bright but it blocks that intense sun. Perfect! No bubbles. The heat from that sun and on the tank gone. I'm happy 😊I ended up buying the blue one for a different window. See pictures.

I got this product to put on my car sunroof so it was a little tricky to apply by myself, which I was expecting. If you can’t get the whole thing on there in one go it’s not worth it. I didn’t cut my piece straight enough and tried to fill in a gap on the bottom, but this smaller piece just kept falling off and moving around while I was trying to apply it. I also don’t think the razor they give you works well at all in my experience so I would try and cut your piece as nicely and closely to what you’re going to need before trying to install it on your surface. I also found it a little tricky with the squeegee and found a credit card to be a little bit easier to control. Still four stars though because it looks exactly as it was described and looks nice after trying a second time using the tips I left in this review. I will add a picture if I ever get a sunny day.

This decorative privacy film adds the look of stained glass without the commitment (or the price tag). It adheres to windows without glue and applies easily with the included tools, making installation simple and stress-free. I used it to add a bit more style and privacy to a decorative window, and I love how it softens the light without darkening the space. It gives just the right amount of curling detail in the pattern, and for the value, it works well. Lightweight and easy to reposition if needed. The main reason we purchased it was to keep birds from flying into their reflections on the window and it has worked perfectly since we installed it!