ThermalrightAXP90 X53 Full Low Profile ITX CPU Cooler,with 92mm Slim PWM Fan for 2700RPM High Speed ITX CPU Fan,Pure Copper Version,for Intel LGA1150/1151/1200/1700/AMD AM4/AM5

Best tiny cooler for the money I have it on my 7900x3d keeps it 70c under gaming load. Inside a terra with a msi gaming x slim 4090. I had the Thermalright AXP90 X47 copper its a good cooler but it would keep my 7900x3d 82c under gaming load which isnt bad but the Thermalright AXP90 X53 Full is better if you have the space. I replaced the red fan with a white and it looks sweet.

I love this cooler, cooling a sff with a 5900x and a top line gaming with a 9800x3d. Neither thermal throttle. Only with was the full black was still made.

All what you need to do, is swap the original fan to arctic p9 max.

If you HAVE AN AM5 CPU, DO NOT GET THIS BECAUSE THE MOUNTING INSTRUCTIONS WON'T APPLY TO YOU, SINCE THE BACKPLATE ON YOUR BOARD WON'T BE REMOVABLE (AM5 BOARDS DO NOT HAVE A REMOVABLE BACKPLATE).DO NOT GET THIS FOR AN AM5 BOARD OR YOU WILL MOST LIKELY DEFINITELY BE SORRY.I AM SERIOUSLY JUST TRYING TO HELP.IN ALL FAIRNESS, I WILL ADD THAT I USED ANOTHER OF THEIR COOLERS AND IF WAS PERFECTLY FINE (AXP120-X67), so the problem seems to lie with just this one product.My guess is they have a lot of precious copper heatsinks leftover and they can't really sell them since AMD made AM5 with a non-removeable backplate, but I could be wrong.

I've been using this cooler for about a month now on a mini-ITX system with a 7800X3D CPU. Temps are good/reasonable even when under gaming loads. Keep in mind there is little to no room for overclocking when using this cooler, so keeping the CPU settings at stock is recommended with this one.While cooling is good, the mounting system is finicky and there is a danger of bending the motherboard if your not paying attention. When tightening the nuts DO NOT use a screw driver as it's far too easy to bend the board by over tightening. Just hand tighten using the included header until fully snug/tighten.Overall, I recommend this cooler for ITX builds, but gets only 4 stars due to the questionable mounting system. Can handle any AM5 RYZEN 7 CPU's without issue at stock settings, but cannot recommend for RYZEN 9 CPU's.

Easy install for AM5Good temps on my 7600XIdle temp. mid 40s CelsiusVery cool look as well with the orange fan blades and copper heatsinkPretty quiet as well, I have on silent mode.

Low profile cooler for my 7800x3d and 7800xt asrock in formd T1. CPU temps while gaming are low 50s even in custom silent fan profile

The only critic is the mounting design which is poorly put together. For AMD AM5, it is very difficult to work with and the long screws creat trouble after trouble. Also, no idea how long the rubber ring on the screws will last under high temps and pressure. The screws can be easily overtighten and damage you motherboard