VINGLI Upgraded Wide & Deep Garage Storage Cabinet, Metal Storage Cabinet with Pegboards, Wheels, Locking Doors and Adjustable Shelves (Black, 43''W x 20''D x 72''H)

This is shorter than I thought, mainly because the wheels and thick bottom take away a good 6 inches of height. Nevertheless, it holds everything I had in mind with room to spare. I wasn't planning on putting on the wheels, but left them on because I'm tall. Not sure how it rolls fully loaded. Kinda a scared to roll it.The door sticks a bit, but I got used to it. It is possible I misunderstood the instructions for the locking mechanism. Those were really unclear. I found the rest of the instructions pretty good though.I didn't find the instructions when I unpacked the boxes. The instruction and locking bars where located between 2 shelves that I didn't bother to separate until it was time to load the shelves, which I correctly figured was one of the last steps. I found the instructions on the Vigli website and printed them out. They were harder to follow in black and white, print them in color/grayscale. When I finally found the instructions, they were easier to follow, but I had already completed most of the steps.Took me about 4 hours to put together. That includes dismantling and reassembling the top of unit because I put it on backwards. As suggested by another commenter, I carefully marked every component with marker and blue tape (she used crayon) in multiple places to identify the part letter and which way is up or front. That was a very helpful tip, except when I promptly ignored my tape when I put on the top. After drilling in 40 screws to secure the top, I had to unscrew 40 screws, rotate the top, then drill them back in.About 2 of those hours were spent unpacking. A box within a box with metal corner guards and lots of precisely packed Styrofoam. I had to double check this came from China because the packaging made me feel like it came from Japan. Despite all of that there was one slight bend of a corner and some scratches, but one of best protected shipments I've seen.Definitely get a power screw driver. Also, get a magnetic ph1 bit. The magnetic bit I finally bought a few years ago really paid off for this work. Also, get a 90 degree adaptor for the back panels. I ended up manually screwing those in with the provided screw driver which I laid flat on the back of the panel. After this was done, I noticed I placed my 90 degree bit adapter with a different drill, that would've been nice.While largely unused, the provided screw driver was nice enough to throw in my tool box and not the trash where these tools usually go.One other issue is the lower front inside slots for the shelf was misaligned with the 4 other slots on the back and other front inside. It was aligned as I went further up and the lowest shelf is stable enough, but that is very disappointing at this price point. Having said that, the shelf supports are easy to install, if you read the instructions which ai didn't initially, and are very solid. I've weighed that entire shelf down with gallon buckets of paint without any sagging.I know I griped a lot, but I'm very pleased with this. The deeper and wider shelves work really well and allow me to store a lot of stuff. I love the pegboards. While not intended, I may enjoy the mobility if I ever get the courage.

My title says it all. I ended up buying four of these, one at a time. The instructions are a little vague, so I had to partially disassemble and reassemble the first one before I got it right. Here are some things I learned:1. Identify all the panels and mark them front, top, side as needed with a crayon so that you chose the right part during assembly.2. When you install the sides, you must push them down all the way until the sides bottom out. They might get stuck going in so wiggle and push down.3. There is a poor photo showing arrows at the top of the sides. Be sure to find those arrows to ensure you get the sides installed correctly.4. When you install the corner braces, just snug them up until all the panels are installed and everything is squared up. Then go back and tighten down those brace screws.5. Before installing the shelves, decide how much room you need above each shelf, starting from the floor of the cabinet. Now, use a tape measure and measure from the cabinet floor up to where the first shelf bottom is wanted. Mark that spot with a crayon at all five shelf bracket holes. Install the shelf brackets and verify this is the height you want. If not, move the brackets to the referred position. Repeat this for the other shelves, or just count the number of bracket holes up from the previous shelf.And lastly, if you read reviews where people say they couldn’t install them because the design was a problem, disregard those. Those people didn’t read and understand the instructions, or they shouldn’t be allowed to handle tools. 😀😜😂

Update after 3rd one:The first 2 arrived with damage boxes but the parts were not damaged. The 3rd cabinet had two prices that where bent in the large box (it comes in 2 boxes). It was mishandled badly during shipping because the factory packaging was all done correctly.The seller’s customer support was GREAT! They always got back within same day or 24 hours.I contacted them before fully unpacking because I didn’t know if they would want it returned and there was no way I could repackage it once it was all out. They said to go ahead and unpack it and that I would not need to return it if it was damaged.I sent them plenty of pictures of the unpacking process to show it was damaged upon receipt. They sent an entire new big box of parts. Sadly, it also had a few damaged parts but I was able to use pieces from both boxes to get a while I damaged cabinet.After having these 3 for a few months, they are great. I love the wheels, reinforced shelving, color and locking doors. I could not find all features on any cabinets at my local stores.I would but a forth if needed!——————————————Original review:Just put it together and will order a few more. The packing was well done and there were no dents on panels. This was my biggest concern but they’ve done a good job designing the packing. There are even metal corner protectors on each box corner and it comes in two boxes.

nice product..

The overall quality of the product is cheap. The metal is light, things are split into two pieces in areas where one would provide more strength. And the main assembly used for adhesion of panels are these angled pieces of metal that take bolts…here’s where it gets fun. Because this design does not use locking joints, the bolts are not only intended for adhesive assembly, but also strength. Well, that doesn’t do a whole lot of good when you’re finding that half of all the hardware included has such bad metal burrs that you’re incapable of assembling this thing without stripping out every other piece. So you’re left with going out and getting your own quality hardware. Thanks Ace Hardware…50 bucks later. Yay it’s assembled. Could have bought the same thing at Lowes for less hassle. Better quality and less time. Buyer beware.

Good sturdy cabinet, easy to install. Great product for my garage.