IFUN 3D Printer Standard Resin- 405nm Aromatic Mint Odor LCD DLP UV Cure Rapid 3D Print Photopolymer Rigid Resin Liquid 500g (Pink)
Description
- 1.Extra 50g in a bottle: In order to reduce the occurrence of material shortage when printing large-size model, we add extra 50g in a bottle but keep same price 2.Friendly Resin: We insist using environmental-friendly raw materials,ensuring low odor and low PII. And our main raw material have passed REACH! 3.No Cracking: Low shrinkage rate（≤1%）Won't appear warped edge and Cracking phenomena. Even large-size model printing keep good printing details 4.Wide Applicability: After hundreds of tests on different brand 3D printer, we confirm that our resin are suitable for most brand LCD printer 5.High precision: Professional testers can print a minimum of 0.01mm supporting and even a new can print out 0.03-0.05mm
IFUN 3D Printer Resin 405nm Aromatic Mint Odor LCD DLP SLA UV Cure Rapid 3D Print Standard Rigid Photopolymer Resin Liquid *Lab test approved with MSDS & RoHS certificate. *To ensure the great stability of 3D printing model, IFUN choose Polyurethane as raw material rather than Epoxide Resin. *To ensure the personal safety , even though there is low odor with Polyurethane, IFUN would rather choose Polyurethane than add BPA(Bisphenol A) which is found to be detrimental to human health. Storage: Keep away from sunlight & seal at room temperature. It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin. Usage: Shake well before use, Avoid direct sunlight Do not drink it and keep out of the reach of children & pet Wear gloves to avoid direct skin contact and keep the room ventilated.If feel discomfort after skin contact, please seek timely medical attention. Once the model is complete, please wash it with high 95% degree or higher ethanol alcohol for 30 seconds at least. If you don't use the resin please do not leave them in the resin tank over 48 hours.
Common Questions
Trustpilot
2 weeks ago
3 weeks ago
