International VRB-5610RD 56-Inch 10 Drawer Red Tool Cabinet with Heavy Duty Ball Bearing Drawer Slides

this is great toolbox for the price i paid $956 shipped. it is not as high of quality as a snapon box of comparable size however i would buy this box again. the only issue i had was the lock rod fell out of the cam that attaches to the key lock. this was easily fixed by reinserting the lock rod and drilling a hole throught the tip of the rod and then inserting a cotter pin. quick and easy fix. if you need a good size box and haven't bought into the tool truck sales pitch buy this box. my box is close to fully loaded with tools and it still works very well. smooth operation of the drawers and the detent that holds the drawers shut it strong feels secure. it comes with plastic casters but this is not an issue to me. a 56 inch tool box isn't something you lug around the shop. a service cart is. it comes with 2 keys with key codes stamped in the keys (write that code down as it can be used to make keys from nothing if you go to the right locksmith.) i used to be a locksmith and the key way (key blank) looks familiar to me. this is good because some keys come from china and you cannot get duplicates made from the key. i have not made duplicates of this key yet but i am confident this will not be an issue. I have had the box for a while now and i have some dents and dings in it. this isn't a big deal to me because it's a tool box not a tank. don't believe the hype about anything that isn't snapon, matco, mac is crap. this toolbox is proof that you don't need to spend insane cash to get a quality product. would recommend purchasing to anyone needing a toolbox of this size.

This cabinet is great. Arrived in good condition and delivery was done right into garage. Put the whole thing together myself, being careful to keep the cabinet off the floor the whole time. Eventually had to put it on it's back to finish the job, but because I had it on blocks it was righted easily. One thing I did that was different from the instructions was to put the fixed wheel on the end away from the handle. This is because the unit was going to be parked in a tight spot with just 3 inches of room. I can now push it right in at an angle until the front corner touches the wall and swing the unit in using the front fixed wheel as a pivot and the swing casters in the middle and handle end allow this. The drawers move smoothly and the long top drawer is big enough to handle most of my clamps, levels, etc. that until now have been leaning in a corner.

Just so so

This was purchased through Amazon, not another vendor on Amazon. Delivery was by ABF Freight (Massachusetts). ABF called prior to delivery and I was able to confirm a lift gate truck was going to be delivering. The driver was great and extremely helpful!Now the toolbox, approximately 2 feet deep which is nice. Paint finish is very good, no scuffs, flakes, chips or runs. The build is solid, not Snap On solid, but better than Craftsman toolboxes. Mine came with the "rubber" top mat and foam drawer liners. There is some side play to the drawers, but again this is a mid tier box that is made in Canada.I would definitely recommend if you are looking for a deep toolbox for a little more than a Craftsman. I honestly don't know how much more this is to a comparable Craftsman unit. Paying the extra for a Canadian unit is worth it for me.This is my honest review which I paid FULL price for the box and typed from my cell phone. Now I just need to get the top chest one of these days...

Very disappointed with this box, compared to my Snap On box it's not comparable, even the Harbor Freight ones are nicer. I guess there's a reason they went out of business.

I purchased this box and it took 5 weeks to ship. Finally when it did ship, the only information I saw was that it came from Phoenix Arizona. I was excited to finally receive it. But when it was delivered, the box was damaged. Total waste of money and time. Thanks for nothing, lame shipping company. Although after seeing the box in person, I admit it is nice. The top mat was foam not rubber. The drawers and finish looked really great and the trim was stunning. Not a bad box. Just a huge disappointment.I received my second box in black instead of blue. Regret that decision already. I prefer blue it looks nicer. The box feels decent as far as structure and strength. The castors feel like plastic and the stops are rather flimsy. The sides appear single walled and the box does have trim. The trim is silver and contrasts nicely with the black but it's also just a thin 90 degree piece of metal along the front corners of the box. The drawers feel wobbly when loaded. The detents on the drawers are nice. Hold really well. The drawer liners are just thin foam sheets. I replaced it with premium liners. The handle just bolts to the wall, no threads or bolt hole supports. The same with the castor bolt holes. I expected the holes for the castors to be stronger.The top wide width drawer has a support that goes horizontal the full width of the drawer. Instead of a support that divides the drawer vertically, it's like a bump in the drawer at least 3 inch strip of metal in the middle of the drawer. Kind of a bad design. But the drawer holds all my sockets, sledges, long prybars,and breaker bars. So I made it work well for me. The drawer trim does not have any securements like griplatch or other systems.At least it's a bigger box for me, holds all my tools with minor room for expansion and cost less than $1000! All other boxes this size sell for much more. If I keep the box stationary as much as possible, it should last long. I question the longevity if it will be moved around a shop often. I have my Matco MSC12 for that so I'm good.