Note: The remote control has a transparent signal blocker. When using the device for the first time, pull it out before use. Method of use: first cover the solar panels completely or put them down on the table. Then press the button for 5 seconds to start the lamp, and enter the first working mode after starting. Each time the button is pressed, a working mode is changed and the light flashes. The sequential switching of the working mode is as follows: 1. Low light + induction mode. When someone passes by, the sensor triggers the circuit to start the strong light; 15 seconds after people leave, lights are dimmed. (Recommended preferred use). 2. Induction mode: When someone passes by, the sensor triggers the circuit to start the strong light; 15 seconds after people leave, the light is off. (Suitable for places with short light duration) 3. Lighting mode forever. After dusk it always lights up and has no sensor function. (Suitable for special places). 4. Emergency light mode. It is often used for emergency lighting, such as power outage and night activities. The timing of the emergency light mode is 30 minutes. After the light is off, it must be restart or light the solar panel once to restart it. 5. Switch off. Specifications: Solar panel: 5 W 3.2 V. Maximum lumen value: maximum 900 lm. Quantity: 48 LEDs. Lithium battery: 3.2 V 4500 mAh lithium iron phosphate. Infrared sensor: 5-8 m detection distance and 120° detection angle. Charging time: 8 hours sun exposure Waterproof rating: IP65. Remote distance: less than 8 m. Box contents: 1 x 48 LED infrared sensor solar light. 1 set of mounting accessories. 1 x user manual (English
Trustpilot
4 days ago
3 weeks ago
